Shenzhen HiLink Technology Co.,Ltd.
Shenzhen HiLink Tech Co.,Ltd - Power Your NetworK to the Higher Level .We HiLink You.
Add to Cart
100KM 10Gb BIDI SFP
Tx: 1310nm/ Rx: 1310nm BIDI SFP+ Transceiver for 10GbE
Tx: 1310nm/ Rx: 1310nm BIDI SFP+ Transceiver for 10GbE
Features
Supports 9.95 to 10.3Gb/s bit rates
Simplex LC Connector
Hot pluggable SFP+ footprint
Uncooled 1310nm LD transmitter, 1310nm PIN photo-detector
Applicable for 3km SMF connection
Low power consumption, < 1.0W
Digital Diagnostic Monitor Interface
Optical interface compliant to IEEE 802.3ae 10GBASE-LR
Electrical interface compliant to SFF-8431
Operating case temperature:
Commerical:0 to 70 °C
Applications
10GBASE-LR at 10.3125Gbps
10GBASE-LW at 9.953Gbps
Other optical link
General
Hilink HLSB311XL-CD03 series single mode transceiver is small form factor pluggable module for optical data communications such as 10GBASE-LR/LW defined by IEEE 802.3ae. It is with the SFP+ 20-pin connector to allow hot plug capability. The HLSB311XL-CD03 module is designed for single mode fiber and operates at a nominal wavelength 1310nm; The transmitter section meet the class 1 laser compliant according to International Safety Standard IEC-60825.The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. The transceiver designs are optimized for high perform -ance and cost effective to supply customers the best solutions for telecommunication.
10G BIDI Transceiver
| SFP-10G-BXU 10KM | SFP+10GB BIDI TX1270nm/RX1330nm 10KM |
| SFP-10G-BXD 10KM | SFP+10GB BIDI TX1330nm/RX1270nm 10KM |
| SFP-10G-BXU 20KM | SFP+10GB BIDI TX1270nm/RX1330nm 20KM |
| SFP-10G-BXD 20KM | SFP+10GB BIDI TX1330nm/RX1270nm 20KM |
| SFP-10G-BXU 40KM | SFP+10GB BIDI TX1270nm/RX1330nm 40KM |
| SFP-10G-BXD 40KM | SFP+10GB BIDI TX1330nm/RX1270nm 40KM |
| SFP-10G-BXU 60KM | SFP+10GB BIDI TX1270nm/RX1330nm 60KM |
| SFP-10G-BXD 60KM | SFP+10GB BIDI TX1330nm/RX1270nm 60KM |
| SFP-10G-BXU 80KM | SFP+10GB BIDI TX1490nm/RX1550nm 80KM |
| SFP-10G-BXD 80KM | SFP+10GB BIDI TX1550nm/RX1490nm 80KM |
| SFP-10G-BXU 100KM | SFP+10GB BIDI TX1490nm/RX1550nm 100KM |
| SFP-10G-BXD 100KM | SFP+10GB BIDI TX1550nm/RX1490nm 100KM |
Product Picture
Optical Characteristics (TOP(C) = 0 to 70 ℃, TOP(I) =-40 to 80 ℃,VCC = 3.13 to 3.47 V)
| Parameter | Symbol | Min. | Typ | Max. | Unit | Note |
| Transmitter | ||||||
| Operating Wavelength | λ | 1270 | 1310 | 1355 | nm | |
| Ave. output power (Enabled) | PAVE | -6 | -1 | dBm | 1 | |
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| Extinction Ratio | ER | 3.5 | dB | |||
| RMS spectral width | Δλ | 1 | nm | |||
| Rise/Fall time (20%~80%) | Tr/Tf | 50 | ps | |||
| Dispersion penalty | TDP | 3.2 | dB | |||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Output Optical Eye | Compliant with IEEE 0802.3ae | |||||
| Receiver | ||||||
| Operating Wavelength | λ | 1270 | 1310 | 1355 | nm | |
| Receiver Sensitivity(ER=4.5) | PSEN1 | -10 | dBm | 2 | ||
| Average Receive Power | PAVE | 0.5 | dBm | |||
| LOS Assert | Pa | -30 | dBm | |||
| LOS De-assert | Pd | -11 | dBm | |||
| LOS Hysteresis | Pd-Pa | 0.5 | dB | |||
Notes:
1. Average power figures are informative only, per IEEE 802.3ae.
2. Measured with worst ER; BER<10-12; 231 – 1 PRBS.
Ordering Information
| Part Number | Description |
| HLxx1XL-CD80 | SFP+BIDI,9.95-10.7Gb/s, c-band,80km, 0~70℃, with DDM |
| HLxx1XL-CDH1 | SFP+BIDI,9.95 to 10.7Gb/s, C-band, 100km, 0~70℃, with DDM |