Shenzhen HiLink Technology Co.,Ltd.
Shenzhen HiLink Tech Co.,Ltd - Power Your NetworK to the Higher Level .We HiLink You.
Add to Cart
Hilink 2x2 Multi-mode Bypass Mechanical Fiber Optic Switch (2X2B MM Optical Switch) connects optical channels by redirecting an incoming optical signal into a selected output fiber.
The 2x2B MM Bypass Mechanical Fiber Optic Switch (2X2B MM Optical Switch) support all wavelength at 850nm, it offers ultra-high reliability, low insertion loss, fast switching speed as well as bi-directional performance. The optical switches are widely used for Optical Network, Protection, Transmitter and Receiver Protection,Network Test System and Instrumentations.
Features
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
2×2B MM Optical Route
Pins
| Parameters | Pins | Electric Drive | Status Sensor | ||||||
| 2×2B | Optical Path | 1 | 5 | 6 | 10 | 2-3 | 3-4 | 7-8 | 8-9 |
| Non-latching | P1-P3 | -- | -- | -- | -- | Close | Open | Open | Close |
| P1-P4,P2-P3 | V+ | -- | -- | GND | Open | Close | Close | Open | |
| latching | P1-P3 | -- | -- | GND | V+ | Close | Open | Open | Close |
| P1-P4 P2-P3 | V+ | GND | -- | -- | Open | Close | Close | Open | |
Ordering Information:
| 2×2B Fiber Optical Switch - Ordering Information: -SW-2×2F-A-B-C-D-E-F-G | ||||||
| A | B | C | D | E | F | G |
| Fiber Type | Operating Voltage | Switch Type | Test Wavelength | Tube Type | Fiber Length (Include connector) | Connector |
| SM: SM,9/125 M5:MM,50/125 M6:MM,62.5/125 X: Others | 3: 3V 5: 5V | L: Latching N: Non-latching | 850:850nm 1310:1310nm 1550:1550nm 1310/1550: 1310/1550nm X:Others | 25:250um 90:900um X: Others | 05:0.5m±5cm 10:1.0m±5cm 15:1.5m±5cm X:Others | OO:None FP: FC/PC FA: FC/APC SP: SC/PC SA: SC/APC STP: ST/PC LP: LC/PC LA: LC/APC X: Others |